Telephone +44(0)1782 536615 or Fax +44(0)1782 533415 or e-mail; info@pugmills.com
Telephone +44(0)1782 536615 or Fax +44(0)1782 533415 or e-mail; info@pugmills.com

Gladstone Engineering Co Ltd

Pugmills

Wheels

Spraybooths

Clay Rollers

Slip Preparation

Specialised Mixers

Glaze Preparation

Whirlers

Miscellaneous Machines

Specialised Equipment

Accessories and Spares

List of Equipment

Links

Home
Contact Us
Copyright 2007 Longton Light Alloys inc Gladstone Engineering Co Ltd
About Us

G85 Vacuum Plaster Blender

G85 Gladstone Vacuum Plaster Blender

The Vacuum Plaster Blender has been developed to remove the air from the plaster during the mixing process. This will enhance the quality and durability of the mould without loss of water absorbtion. The machine consists of a free standing mixing unit and platform. The mixing head is counter balanced so as to facilitate ease of use. A 3 gallon stainless steel jug is provided which is specifically designed to form a seal with the mixing head itself. The Blender comes complete with a High Capacity Vacuum Pump and all associated electrical switchgear.

Technical Data
Construction  Electrical welded mild steel frame and platform, stainless steel sealing lid with 3 Gallon capacity container.
Bearings  Sealed for life, radial units with double lipped additional vacuum seal.
Drive Unit     0.37kw single or three phase duel voltage in line gear unit, driving a stainless steel shaft and bronze blades.
Vacuum Pump   Becker U.3.6S 28" HG vacuum, rotary oil sealed unit complete with moisture separator and intake filter unit.
SIZE                        Height                1.9m x Depth 720mm x Width 650mm

                                Weight                140 kilos (approx.)

 

G86 Plaster Blender

G86 Gladstone Plaster Blender

The Plaster Blender has been designed to mix plaster quicker and more efficiently than by hand and produces plaster which is more consistent, resulting in better mould life expectancy.
The machine consists of a free standing mixing unit and platform. The mixing head is driven by a 0.37kW inline motor and gear unit which is raised or lowered by means of a counter
balanced guide platform.
Each blender is supplied with all switchgear and a timer unit allowing the blender to automatically switch off after a pre determined mixing period.

Technical Data
Capacity   3 to 5 Gallon capacity
Drive Unit   0.37kw geared drive, output speed 500 rpm
Shaft   Stainless steel shaft and bronze blades.
Size                        Height                1.9m x Depth 720mm x Width 650mm
                                Weight                140 kilos (approx.)

Optional extras—Blending jugs , visual indicators for time duration .